Articlenumber: 3291
Voor 12:00 uur besteld, morgen in huis
The KOKS EcoVac Combi vacuum/jetting truck is designed for multifunctional applications and is suitable for (heavy) industrial cleaning and sewer cleaning. Specially developed for high pressure cleaning up to 1,000 bar, suctioning, discharging and transporting hazardous, fluid and contaminated substances, the truck is available in PED, ASME, ADR (CEOC) and/or ATEX (Ex) versions and built in accordance with all applicable safety standards.
The KOKS EcoVac Combi vacuum/jetting truck is designed for multifunctional applications and is suitable for (heavy) industrial cleaning and sewer cleaning. Specially developed for high pressure cleaning up to 1,000 bar, suctioning, discharging and transporting hazardous, fluid and contaminated substances, the truck is available in PED, ASME, ADR (CEOC) and/or ATEX (Ex) versions and built in accordance with all applicable safety standards.
Effort KOKS EcoVac Combi
The KOKS EcoVac Combi vacuum/jetting truck can be used for suctioning, discharging and transporting fluid and hazardous substances, such as liquids, sludge, fats, oils, fuels and chemicals, but also for jetting and cleaning pipes, tanks and sewers at high pressure.
Characteristics
The powerful liquid ring vacuum pump allows large quantities of (fluid) substances to be processed in a short time and then transported in accordance with current ASME/ADR (CEOC) regulations. Thanks to the integrated high pressure pump, several types of cleaning can be performed on site with a single machine. Use of a standard transfer gearbox allows more accurate control of the water quantity by selecting the right gear. This results in a longer service life and less wear in the high pressure pump. Further advantages of using a transfer gearbox are reduced fuel consumption and a lower noise level. The user benefits from significant time savings and a huge reduction in cost.
Performances
The KOKS EcoVac Combi vacuum/jetting truck can be fitted with various option kits that are appropriate for your needs, for industrial applications and/or sewer cleaning work.
Designed and certified
| For | • assembly on a 3-axle, max. 400 HP chassis. |
| • transportation of hazardous substances. | |
| • PED - ADR (CEOC) requirements (for specifications refer to option KE•15) (ASME for USA). | |
| • tank codes S4AH and L4AH. |
Pressure vacuum tank
| Volume: | 12 m³, excl. the service water tank. |
| Material: | stainless steel AISI 316 grade; material no. 1.4404. |
| Rear door: | hydraulically opening and bolting. |
| Discharging: | by means of tipping and pressurizing. |
| Loading: | by means of suctioning. |
| Including: | 6” suction/discharge connections with ball valve. |
Service water tank
| On behalf of: | cooling the liquid ring vacuum pump. |
| Volume: | 1.2 m³. |
| Material: | stainless steel. |
| Including: | hinged exhaust stack. |
Vacuum pump
| Type: | liquid ring. |
| Capacity: | 3,400 m³/h. |
| Max. vacuum: | 95%. |
| Piping: | completely stainless steel, provided with filter. |
| Drive: | V-belt transmission from the motor/distribution PTO. |
Compressor
| Type: | rotary vane pump. |
| Capacity: | 200 m³/h, 2.5 bar overpressure. |
| Drive: | hydraulic. |
Clean water tank
| On behalf of: | the high pressure pump. |
| Volume: | 1.5 m³. |
| Material: | stainless steel. |
| Including: | min. level protection. |
High pressure pump
| Type: | 3-cylinder high pressure plunger pump. |
| Operating pressure: | 1,000 bar. |
| Rate of flow: | 110 l/min |
| Provision: | stainless steel pump head. |
| Drive: | mechanical from the transfer box PTO. |
| Pressure connection: | M24, incl. electrical connection points and control cable. |
| Pressure regulation: | by means of a pneumatically operated overflow valve, the operating pressure can be adjusted from the control panel. |
| Supply pipe: | short piping, provided with the necessary flexible elements. |
| booster pump. | |
| horizontal filter, provided with shutoff valve, drain valve and vent valve. | |
| Protections: | booster switch, detecting the min. booster level exceeding by means of a horn. |
| oil pressure lubrication. | |
| Control: | extension of the control box with a control system by means of a cable with control unit and emergency stop. |
Dimensions
| Length: | approx. 9,400 mm, chassis-dependent. |
| Width: | approx. 2,550 mm. |
| Height: | approx. 3,700 mm. |
| Wheelbase: | approx. 4,500 mm + 1,350 mm, chassis-dependent. |
Weights
| Empty weight: | approx. 17.7 tonnes. |
| Max. permissible weight: | 28 tonnes, depending on the regulations in the country of destination. |
Standard safety provisions
| Consisting of: | rupture disc, hose rupture safety valves on behalf of the rear door and tipping cylinder, beacon light, emergency stop, tip unbolting protection, repair cross beam, catwalk, rear door clamp protection, earth reel, emergency stop reel, rear door protection, tipping protection and powder extinguisher. |
Miscellaneous
| Provisions: | working light, rear bumper and stainless steel control box/hose box/tool box. |
| Body inspection: | arranged by KOKS Group. |
| Instruction manual: | consisting of operating/maintenance instructions, drawings and schedules. |
✔ Easy control.
✔ Multifunctional in use; suctioning, discharging, transporting, cleaning and jetting.
✔ Ergonomic.
✔ Built to the latest environmental and safety standards.
✔ Approved in accordance with ASME American type-approval - PED or ADR (CEOC) European type-approval.
✔ Responsible transportation in accordance with ASME - ADR (CEOC) regulations.
✔ Powerful suction force and flushing capacity (high pressure pump).
✔ Optimum balance between a chassis with a short wheelbase and maximum tank capacity.
✔ Solid construction and components for high power and maximum payload.
✔ High quality, long service life and economical purchase price.
✔ Ergonomic and chassis-independent design due to the multifunctional auxiliary frame and adjustment of the pump angle.
Get advice from a specialist
Get to know us and our products
Get insight into which solution suits you best
Articlenumber: 3291
