KOKS MOBILE SCRUBBER 4000

Specifications

• The KOKS mobile scrubber 4000, also referred to as a return vapour cleaner, may be connected to the vacuum pump exhaust connection of a vacuum - tank truck. The scrubber cleans, in 10-phases*, vapours - gases from the vacuum pump exhaust which are released when suctioning products using vacuum technology.
  
  Effort KOKS mobile scrubber 4000
  The KOKS mobile scrubber 4000 return vapour cleaner is perfect for suction activities in general industrial cleaning or for use in the (petro) chemical industry and in refineries. The cleaning principle of the gas scrubbing equipment on the KOKS mobile scrubber 4000 operates based on a 10-phase* system where the outgoing air from the vacuum pump is transported successively through a cleaning fluid (such as mineral oil, lye or demineralised water), a honeycomb grid, Raschig rings, an atomisation system and a labyrinth separation system. This results in thorough cleaning of the exhaust air from the vacuum pump in a 10-phase* scrubbing process. Depending on the vapours - gases to be cleaned, the cleaning phases may consist of the same or different cleaning agents. In addition to reducing harmful emissions, the KOKS scrubber is also used to reduce odour nuisance.
  
  Characteristics
  During suction and discharge activities, the vapours - gases are cleaned using the two washing tanks connected in series and a 10-phase* scrubbing process to produce a return vapour that is legally acceptable for both people and the environment.
  
  Performances
  The unit can be fitted with various option kits that are appropriate for your needs and for industrial applications.

• Designed and certified for

  connection to the pump exhaust of a vacuum/tank truck.

  cleaning of liquid vapours.

  
  Scrubber tanks

  Number of scrubber tanks	2 pieces.
  Volume	max. 600 litres of cleaning agent per phase.
  Material	stainless steel AISI 304 grade, material no. 14301.
  Airflow	approx. 4,000 m³/h.
  Operating pressure	≤ 0.5 bar.
  Connection	coupling type to be agreed in consultation, in combination with a flange connection, mounted as low as possible.
  Base frame	mounted on a stainless steel subframe.
  Air exhaust system	approx. 4,250 mm from the bottom side, through a manually operated hinged exhaust stack.
  Provisions	2 discharge tubs.
  	2 pall ring chambers, excl. pall rings.
  	2 inspection hatches that allow easy scrubber tank cleaning and replacement of the pall rings.
  	level detection for each tank.
  	cleaning agent drain.
  	2 labyrinth separators, incl. an inspection hatch for cleaning and/or replacement of the labyrinth separators.
  	2” filling connection for each tank.
  	2½” drain connection at the base of each tank.
  Measurements points	at the inlet.
  	at the exhaust, as high as possible.
  Sample-taking point	on each tank, exact position to be determined in consultation.

  
  Dimensions

  Length	approx. 3,000 mm.
  Width	approx. 1,320 mm.
  Height	approx. 2,600 mm.

  
  Weights

  Empty weight

  approx. 1,900 kg.