KOKS ECOVAC

Contact us for the extensive financing possibilities.

Grade

• carbon steel (H II), material no. P265GH.

• HP pump 70 l/min.,140 bar.

Provisions

• hose reel, manually operated, with HP hose.
• clean water tank, in combination with the self supporting unit.
• forced water drain.
• high pressure gun.

Provisions

• liquid/sludge pump.

On behalf of

• continuously pumping liquids.

Capacity

• approx. 80 m³/h.

Operating pressure

• approx. 3 bar.

Instead of

• standard bumper.

Power supply

• by means of the hydraulic system of the body.

Capacity

• 2,500 m³/h, instead of standard 3,400 m³/h.

Material

• unpainted stainless steel AISI 304 grade.

Dimensions

• length approx. 1,000 mm (depending on the available space).
• depth 500 mm.
• height 600 mm.

Provisions

• hinged doors with a solid lock.

Location

• underneath the vacuum pump.

KE-07-A

• compressor max. 200 m³/h.

• compressor max. 350 m³/h. 

Tank volume

• approx. 15 m³.

In combination with

• a 4-axle chassis, depending on the version and chassis homologation.

On behalf of

• export vehicles with euro-3 standard approval or less.

Execution

• pipe routed through the tipping point with swivel coupling.

Material

• unpainted stainless steel AISI 304 grade.

Dimensions

• length 1,000 mm.
• depth bottom side 600 mm.
• depth top 270 mm.
• height 1,340 mm.

Provisions

• 2 hinged doors with a solid lock.
• 3 removable stainless steel boards.

Location

• in front of the hose box.

Material

• stainless steel AISI 316 grade, material number 1.4404.

On behalf of

• increasing the flush water capacity.

KE-13-A

• 2 m³ additional volume, 3.5 m³ total volume, in combination with a 12 m³ tank volume. 

KE-13-B

• 3 m³ additional volume, 4.5 m³ total volume, in combination with a 15 m³ tank volume. 

Provisions

• separate service/clean water tank.
• 2-hand operation for the rear door safety lock.
• constant earth grounding, 2 wire system, incl. earth reel, according to BRL K903, Kiwa report 70025. 
• earth reel.

Including

• book of certificates with all required documents.
• inspection.
• other SIR requirements.

Certification

• ADR (CEOC) pressure/vacuum tank with type approval NL-RDW-A-0035. 

Body

• designed and certified for transportation of hazardous substances in accordance with the latest ADR (CEOC) requirements, tank codes S4AH and L4AH. 

Provisions

• protective/roll bars.
• pneumatic lock on the tank and valves.
• explosion pressure in conformity with the current ADR (CEOC) guidelines/directives/standards.
• ADR (CEOC) number plates.
• ADR (CEOC) label holders.
• fire extinguishers, 12 kg, in a plastic housing.
• double insulated wiring.
• ADR (CEOC) final inspection.
• project design calculation.
• pressure test. -nitrogen connection.
• X-ray of the welded joints, both longitudinal and around the periphery.

ATTENTION

• for Germany application of an ATEX pump with category 2 certification is required.

On behalf of

• scrubbing vapours from the vacuum pump exhaust in a 6-phase cleaning process. 

Execution

• 2 scrubber tanks.
• max. 600 litres of cleaning agent per phase.

Material

• stainless steel AISI 316 grade; material no. 1.4404.

Total airflow

• max. 3,500 m³/h.

Air exhaust system

• by means of a hinged upper pump exhaust pipe or a fixed lower pump exhaust pipe. 

Provisions

• 2 discharge tubs.
• 2 honeycomb grids on behalf of evenly distributing the air flow to the pall rings.
• 2 pall ring chambers.
• 2 manholes for easy compartment cleaning and pall ring replacement.
• 2 labyrinth separators, with an inspection hatch for labyrinth separator cleaning and exchange.

Including

• various other items such as drain points, measurement points and level indication. 

ATTENTION

• only in combination with a 4-axle chassis, because of the weight on the front axle. 

Execution in conformity with

• ATEX 114 2014/34/EU.
• ATEX 153 1999/9/EG.

Explosion safety system

• ATEX (Ex) vacuum pump, incl. min level protection.
• ATEX (Ex) butterfly valves.
• ATEX (Ex) level detectors for the various tanks.
• ATEX (Ex) nonreturn valves.
• ATEX (Ex) electrical system in accordance with EN-IEC 60079-14.
• ATEX (Ex) beacon, warning and work lights (if necessary).
• ATEX (Ex) emergency stop system.
• ATEX (Ex) ball valves with couplings.
• ATEX (Ex) constant earth monitoring with earth reel.
• ATEX/PED pressure/vacuum tank calculation.
• ATEX/PED piping calculation.
• risk analysis and checklist.
• declaration of conformity.

ATTENTION

• ATEX directions will always have to be checked due to the differences in each country/region/continent.
• in combination with a split-shaft gearbox, the chassis will have to be supplied with an installed split-shaft gearbox, so being a part of the chassis.

Categorizing

• to be indicated by the customer carefully, because of the customer’s responsibility. 

Designed for

• storage of approx. 50 m DN 13 HP hose.

Drive

• by means of a hydro motor, incl. speed control. 

Location

• at the tank rear.

Excluding

• HP hose.

• KOKS Safety Standard safety provisions.
• machine inspection and inspection certificate.
• KOKS Academy user training, incl. examination and training certificate.

Execution

• closed by means of 2 covers with countersunk T locks.

Instead of

• standard open version.

ATTENTION

• not possible in combination with saddlebag tanks.

Instead of

• standard execution tool boxes and control box.

Material

• brushed stainless steel AISI 304 grade.

Dimensions tool box

• width 1,600 mm.
• bottom depth 500 mm.
• top depth 280 mm.
• height 965 mm.

Dimensions control box

• width 1,200 mm.
• bottom depth 500 mm.
• top depth 280 mm.
• height 965 mm.

Provisions tool box

• 2 hinged doors with solid lock.
• 1 removable stainless steel shelf.

Provisions control box

• roller shutter.
• control box support.

Type

• XP-31XX series.

Provisions

• LCD display with backlight.
• internal memory to store the measured values.
• software and cable to download and print measurements.

On behalf of

• detecting small traces of leakage.

Detection method

• available in a wide range from ppm to LEL level.

Power supply

• 4x AA alkaline dry cell battery.

Optional

• sample tube / hose extension.

Approvals

• ATEX Exibd II CT3.
• CE-markering.

Type

• PD-12 series.

On behalf of

• detecting a wide range of flammable and toxic gasses.
• applications on (industrial) locations with limited access.

Detection method

• available in a wide range from ppm to LEL level.

Power supply

• 24 VDC (18-30 VDC).

Output

• 4-20 mA, potential free relays contact.

Power consumption

• < 7.5 W.

Approvals

• ATEX Ex d IIB + H2T4X.
• CE-markering.
• KOSHA.